Creep N' Crawl Cavity Wax

Creep N' Crawl is a very high performance 1-time permanent cavity wax.

Light amber color:

This product is cutting edge technology and is 100% solids. That means that there are no fillers in the formula.  Only active raw materials to prevent corrosion.  Most cavity waxes have been on the market for years without ever being updated. Creep N’ Crawl is absolutely the newest technology in enclosed area cavity protection. It’s delayed drying formulation (168 hours) allows it to creep and migrate into every possible area before beginning to cure into a flexible wax film.

The challenge when developing an effective cavity wax to make it low viscosity enough to creep everywhere. It needed to be solvent free so that it would not start to cure prematurely, and continue to migrate everywhere. Creep N' Crawl is very low viscosity which allows it to creep more effectively than more viscous coatings. Creep N' Crawl has a proprietary "very slow cure" formulation which allows it to creep and migrate for a full 168 hours (1 week) before curing into a soft flexible wax that will provide protection for many years. 

Creep N' Crawl™ has no solvents or fillers. It is 100% solids which means that every raw material in the formulation is effective as a corrosion inhibitor. It makes the formulation a bit pricey, however, because there are no fillers (solvents, water, etc.) you only need a thin coating, and it goes a long way. . There is nothing to evaporate. so if you spray on 1-2 mil thick, you will be left with exactly what you sprayed on the surface.   One coat in the enclosed cavities and you will never need to treat that area again for 5+ years.

This compound consists of drying oils and anti-corrosion additives dispersed in a proprietary blend that cures in 168 hours (1 week). The results are a cured wax-like film that repels water and remains flexible to prevent chipping & cracking. Used in enclosed areas (rockers, doors, etc.) this product will provide protection indefinitely.

For years most cavity waxes have been old, outdated solvent formulas available only in expensive aerosol cans. Spray cans are the most expensive way to apply a coating because 1/3 or more of the can is the propellent. Creep N' Crawl ™ comes in bulk containers (gallons and pails) and is very easily applied using a standard undercoating gun with extension wands.

If you are serious about protecting your vehicle and would like to step up from using just a really thin undercoating in the cavities, than this is the product for you.