Woolwax® is formulated to be thicker and more resistant to wash-off .
Woolwax® is formulated to be thicker than any other lanolin based undercoating product.
Easily applied using any of the undercoating guns from Kellsport Products.
WOOLWAX® is a lanolin based auto / truck undercoating made from raw WOOLWAX®.
WOOLWAX® sprays on wet and does not dry out.
WOOLWAX® creates a
thin lanolin film barrier to keep moisture and oxygen away from the base
metal. * Solvent free. Environmentally friendly. * Always active and
creeping into inaccessible areas. * WOOLWAX® will thicken to a gel film
after applied and is very resistant to wash off. * Provides vehicle
undercarriage protection for a full season. * Enclosed areas (doors,
frame-rails, rocker-panels, etc., that are not exposed to road-wash will
be protected indefinitely (years). This is the advantage of no
solvents. There is nothing to dry up and evaporate.
WOOLWAX® is a "honey"
color, but when applied appears fairly clear. WOOLWAX is a very clean
product as opposed to messy black products.
WOOLWAX® is a non-drip
formula. We make it to be as thick as possible to resist wash-off, yet
still easily sprayable.
WOOLWAX® can be applied with most undercoating
guns using a pressure of 70-90 psi. Proudly manufactured in U.S.A.
Available in Accessories section is quart bottles of Woolwax™ LV Low viscosity. This is a thinner version of Woolwax™ (also with no smell). Some people prefer a thinner product in the interior areas. It is really not necessary, but some people are of that belief, so we offer a thinner version. A simpler solution is to just thin out traditional Woolwax™ with a bit of vegetable oil (wesson, mazola, etc.). Vegetable oil is very compatible with lanolin. 1/3 vegetable oil, 2/3 woolwax™. If you are using the Woolwax™ bottles, just measure down 2 inches from the top, and that is 1/3 (2").
Note: WOOLWAX® contains more raw woolwax (lanolin) than competitive products. This makes WOOLWAX® a more viscous (thicker) formula and much more resistant to wash-off. Because of this thick formulation it may be necessary to warm the WOOLWAX® for a few minutes in front of a floor heater, before spraying. Once applied the WOOLWAX® will thicken to it's original viscosity which is very resistant to wash-off and will provide a longer period of protection.
